Quick answer
Waiting for rates to fall before buying a business only pays if the monthly repayment saving, multiplied by the months you'll hold the loan, beats the profit you give up while you wait plus the risk of losing the deal. On most purchases the lost profit is far larger than the saving, because a rate cut trims repayments by a few hundred dollars a month while a trading business earns thousands. Wait only if the deal fails at today's repayments.
Key points
- Break-even is simple: months of lost profit, divided by the monthly repayment saving, gives the months you'd need a lower rate to recoup the delay.
- The RBA Monetary Policy Board meets eight times in 2027, starting 8–9 February. Nobody knows in advance what it will decide.
- A median business sale takes around 202 days from listing to sold on one marketplace's data, so a good listing rarely sits still while you wait.
- If the purchase only works at a lower rate, the repayments are the problem, not the timing.
- Vendor finance, a staged deal or a later settlement date can bridge the gap without waiting on the RBA.
Wait for rates to fall before buying a business only if the deal fails at today’s repayments. If it works now, waiting usually costs more than it saves: a rate cut takes a few hundred dollars off a monthly repayment, while a trading business can earn you thousands a month, and the listing may not be there when rates move.
That’s the whole argument. The rest of this guide gives you the arithmetic, the dates, and the situations where “not yet” really is the right answer.
Does waiting for lower rates make sense when you’re buying a business?
It makes sense only when the purchase is too thin to carry today’s repayments. If the business covers its loan repayments, your own wage and a buffer at current cost of finance, waiting swaps certain lost profit for an uncertain, modest saving.
The Reserve Bank’s Monetary Policy Board raised the cash rate on 3 November 2026, on a split 6–3 vote (RBA statement). That’s the backdrop many buyers are reacting to. But a decision like that is a reason to check your numbers, not a reason to freeze. We cover the general version of this question in our page on waiting for rates to fall; this guide applies it to one specific purchase, where the thing you’re waiting on is also someone else’s asset.
What’s the break-even on waiting, in dollars?
Break-even is the number of months a lower rate would have to save you money to repay what the delay costs you. Take the profit you’d forgo while waiting and divide it by the monthly repayment saving you hope to get. If the answer is longer than you’d realistically hold the loan, waiting loses.
The formula:
- Monthly profit you’d earn from the business, after paying yourself a fair wage.
- Months you’d wait for the rate move you want.
- Lost profit = line 1 × line 2.
- Monthly repayment saving if the rate falls as hoped (ask a lender or broker to run both versions of the repayment).
- Break-even months = lost profit ÷ monthly saving.
Our cost-of-waiting calculator handles the first half; the repayment comparison is a quick ask to whoever is quoting your loan.
Illustrative example: the trade-supplies shop
Illustrative only. Invented business and figures.
A trade-supplies shop is listed for $450,000. The owner-operator would earn around $9,000 a month after a fair wage. The buyer plans to borrow $300,000 and is wondering whether to wait until the RBA’s mid-2027 meetings for a cut.
| Buy now | Wait six months | |
|---|---|---|
| Profit earned in the six months | $54,000 | $0 |
| Monthly repayment | Higher | Lower by $600 (if a cut flows through) |
| Saving over the next 12 months | n/a | $7,200 |
| Risk the shop sells to someone else | None | Real |
On these figures, six months of waiting costs $54,000 in profit. A $600 monthly saving takes 90 months (seven and a half years) to repay that. Even if the cut were three times as big, the buyer would still need 30 months of lower repayments just to get back to level, with no allowance for the chance the shop sells.
Flip it. If the shop’s $9,000 monthly profit only just covers $8,500 of repayments today, leaving almost no buffer, the issue isn’t timing. The deal is too tight, and a $600 cut wouldn’t fix it. Waiting for a better rate would be a poor reason to stall, and a better reason to renegotiate the price, the deposit or the structure.
What are the RBA meeting dates in 2027?
The RBA’s Monetary Policy Board meets eight times a year, and its published 2027 calendar lists 8–9 February, 22–23 March, 3–4 May, 21–22 June, 9–10 August, 27–28 September, 1–2 November and 13–14 December (RBA calendar). One more meeting, 7–8 December 2026, is still to come this year.
Those are the only fixed points. What the Board decides at any of them isn’t known beforehand, and commentators’ forecasts move with every inflation release. A purchase plan that depends on a cut at a particular meeting is a plan that depends on a guess.
Two practical points follow:
- Dates are useful for settlement planning, not prediction. If your finance conditions expire the week before a meeting, don’t extend to see what happens.
- A cut doesn’t always reach your loan. Many private and specialist business facilities are priced on the risk and security of the deal rather than tracking the cash rate, and fixed-price facilities don’t move at all. Ask how yours is priced.
What happens to the business while you wait?
It might sell, change, or get worse, and you can’t control which. One marketplace’s data for the 12 months to June 2026 shows a median of 202 days from listing to sold, about six and a half months. That’s indicative, not the whole market, but it’s a useful guide: a listing that’s been out for a few weeks isn’t likely to wait another six months.
Waiting also changes the thing you’re pricing:
- The earnings move. Another half-year of trading either confirms the numbers or shows they were flattered by a good run. That can help you, which is why timing the purchase around the trading season matters as much as timing it around the RBA.
- The seller’s patience changes. A business that’s been on the market a long time often becomes more negotiable; one that’s just listed isn’t.
- Your own position changes. Waiting builds your deposit, but it also leaves your current income exposed to whatever’s pushing you to buy in the first place.
What can bridge the gap without waiting on the RBA?
You can move part of the cost to later through the deal’s structure, instead of betting on a cut. Vendor finance, a staged payment, an earn-out or a longer settlement can all reduce what you need from a lender on day one without delaying the purchase.
| Option | What it does | What to check |
|---|---|---|
| Vendor finance | Seller is paid part of the price over time | Security, repayment terms and what happens on default |
| Earn-out | Part of the price depends on future trading | How “trading” is measured, and who controls the business |
| Longer settlement | Gives you time to get finance and the books checked | The going-concern conditions, if the sale is GST-free |
| Larger deposit | Shrinks the loan you have to carry | Whether it leaves you short of working capital |
On the GST point, the ATO says a going-concern sale can be GST-free only if the buyer and seller agree in writing beforehand, the buyer is registered or required to be registered for GST, and the seller supplies everything needed to carry on the business until the day of sale (ATO). A settlement date that drifts for finance reasons shouldn’t undo that, so confirm the terms with your accountant or lawyer.
If you want to know where you’d land on funding before committing to a structure, see where you stand. It takes about 60 seconds, and it won’t touch your credit file.
When does waiting win?
Waiting wins when the deal is too thin, the information is too weak, or something else needs fixing first. Not every “not yet” is a mistake, and our guide to when waiting is the smarter call sets out the general test. For a business purchase, the cases are:
- The deal fails at today’s repayments. If profit after your wage doesn’t comfortably cover the loan, a cut won’t rescue it. Renegotiate or walk.
- You can’t verify the numbers. No month-by-month figures, no bank statements, no BAS to match. Waiting until you can is sensible.
- Your deposit is short and a few months would close it. A larger deposit lowers the loan and the risk.
- The seller is happy to wait. If there’s no competing buyer and an exclusivity period is cheap, time is on your side.
- You’d be borrowing right up to your limit. Leave a buffer for the first quiet months.
Waiting loses when the numbers are clean, the business is good and the only reason to delay is hoping the cost of finance drops. That’s the one case where the guess is bigger than the facts.
How do I decide this month?
Run the break-even on the real listing, not a general feeling. Get the monthly figures, work out profit after your wage, price six months of waiting, and ask a lender to show the repayment both ways. If lost profit is many times the saving, the question answers itself.
Then:
- Works at today’s repayments, listing live: move on the deal and keep your finance dates tight.
- Works only if the rate falls: renegotiate the structure, not the calendar.
- Numbers unverified: wait until they’re verified, whatever the rate does.
Ready to see what the purchase could look like?
If the deal stacks up at today’s repayments, the next step is finding out what funding suits it. Property-secured business loans run from $20,000 to $5,000,000, and unsecured or cash-flow options for trading businesses are typically $20,000 to $500,000, sized on turnover and bank statements. Past credit issues are considered case by case.
A few things we promise:
- Asking won’t touch your credit file. When you first enquire there’s no credit check, so you can look at your options without a mark against your name.
- Your details aren’t sent to a pile of lenders. One team reads your situation, so your phone won’t light up with strangers.
- A real person calls you. A lending specialist reads your answers and talks through the timing for your purchase.
- Fill the form in accurately. The more exact your numbers, the sooner we can match the right option first time.
Ready when you are
Check your options in about 60 seconds
A few quick questions. Asking won't touch your credit file, your details aren't sent to a pile of lenders, and a real person reads every enquiry.
Frequently asked questions
Is it a good time to buy a business when interest rates are high?
It can be. High rates tend to cool buyer demand and can make sellers more flexible on price and terms, which works in your favour. The real test is whether the business still covers its repayments, your own wage and a safety buffer at today's cost of finance. If it does, a later rate cut is a bonus, not a requirement.
When are the RBA's 2027 meetings?
The Reserve Bank's published 2027 calendar lists Monetary Policy Board meetings on 8–9 February, 22–23 March, 3–4 May, 21–22 June, 9–10 August, 27–28 September, 1–2 November and 13–14 December. The decision is announced on the second day. Check the RBA site for any changes.
Can I refinance a business purchase loan if rates fall later?
Often, yes, but it's not free. Check for early repayment or exit fees, expect a second application and valuation costs on any security, and remember a lender will reassess the business as it trades then, not as it traded at purchase. Treat refinancing as a possible extra, not part of the plan.
Will a Reserve Bank cut lower my business loan repayments?
Not automatically. Many specialist and private business facilities are priced on the risk and security of the deal rather than the cash rate, and fixed-price facilities don't move at all. Ask how your facility is priced before building a plan around a cut.
What if the seller won't wait for me?
Then the decision is between this business at today's cost of finance and a different business later. Ask whether the seller will agree to a longer settlement, vendor finance or an earn-out, which can move part of the cost to later without you betting on a rate cut.
How much deposit do I need if I buy while rates are high?
It depends on the business and the security you can offer. Lenders look at the trading record, the bank statements and what you bring, and a larger deposit shrinks the repayment you have to cover. Property-secured business loans run from $20,000 to $5,000,000, and unsecured or cash-flow options for trading businesses are typically $20,000 to $500,000.